Today, I connected the newly purchased Godiag GT100 to VagDashCan on bench. I plan to do Immo off VAG Edc16. I am very satisfied with the test results. I will summarize the steps briefly, hoping to help more people.
Look at the hardware connection:
How to operate in VagDashCan?
Click on “EDC15 / EDC16” -> “EEPROM Read” -> Save to file -> Immo status was changes. Please switch off ignition for more than 30 seconds.
Turn off the 12V button of Godiag GT100.
Job is done!
Enjoy!