I got a 2010 Honda INSIGHT with 59000 miles on it, several days ago it became disobedient, and I can’t find any way that can help me get rid of the problem until I use Honda HDS HIM Diagnostic Tool. Here I would like to share how to setup the software and to diagnose my car.
This is the address I downloaded HDS 3.101 software:
https://mega.nz/#!iRQWRIba!DgkpsajZCMYcd7_0OIjJqvwM9XEIXByHtU49wmE_Ipw
The password is interesting: not given to the rude person
Then I installed HSD on Windows 7 32-bit
Language: English
The Device I used: Chinese Honda HDS HIM diagnostic tool
Here are the detail steps I followed:
Step 1 – Install HDS PC Ver3.101
- Open DVD Drive (E:) HDS V3.10
- Then copy folder [HDS 3.101.015PC] and paste to Desktop
- Open folder [HDS 3.101.015PC] on Desktop
- And rename folder [PSXMVCI] as [1PSXMVCI]
- Open [setup] application in folder HDS 3.101.015PC and now Preparing setup…
- Click Next to begin installation of HDS PC Ver.3.101
- Accept the license agreement
- Select destination (here: other)
- Select a country (here I choose United States )
- Enter dealer number
- Select a language (I select English here) and click NEXT to continue
And setup status…wait for a while
Honda Next Generation Diagnostic System Setup success! Click Finish to exit.
Step 2 – Add information to registry
- Run [USA-Dealer] registration entries in DVD Drive (E:) HDS V3.10
- Click Yes to add information to USA-Dealer.reg
Keys and values were added successfully to the registry
Step 3 – Install TizWaz installer
- Run [HIMGNA] application in DVD Drive (E:) HDS V3.10
- Click Next to begin setup
- While installation successful. Click Finish to exit the installer
Step 4 – Install CM Update (ECU Rewrite) 6.27
- Run [setup] application in folder HDS 3.101.015PC/ECU-Rwrite-GNA-HIM
- Click Next to install CM Update (ECU Rewrite) 6.27
Status setup…
Step 5 -Run HDS 3.101.015 to diagnose INSIGHT 2010
- Open [Diagnostic system] on desktop
It is the main interface of Honda Diagnostic System HDS 3.101.015.ENG.WIN32
- Click [F12] for detailed setup information
Go to diagnosis
- Select vehicle details, here I select Honda INSIGHT 2010
- Select [Honda system]
Then choose [PGM FI]
- [DTCs/Freeze data]
Done! The possible failures of my Honda INSIGHT 2010 are listed on the interface!
