How to reset GM HMI Module VIN by OBDSTAR X300 Class G3 Key Programmer?
It’s easy and fast to operate. Check the guide below carefully.
1.Connect OBDSTAR G3 to the vehicle’s OBD diagnostic port
2.Tap on [ECU Advanced] function on the main menu
3.Select GM/OPEL-> GM/OPEL V30.04-> OPEL-> HIM2.0/2.5
In addition, X300 Classic G3 also supports the following modules:
- ADAM
- ASTRA J/K
- CROSA D
- INSIGNIA
- MERIVA B
4.Click [Guide] at the left corner to check the function introduction and menu description
5.Back to the last interface, and select [ECU info.] to check the original VIN
6.Select [Reset VIN] to execute the function
Reset VIN success
7.Read ECU info. again to check if the VIN has been reset successfully
Done!