Recently my BMW E-SYS ENET was out of work, thus I searched help on BMW forum and found some problems I may encountered when using E-SYS, here I will show you these problems and solutions.
- Problem:
When choose “Read Coding Data”, get this error:
Transaktions-Report: Aktion: Codierdaten lessen
CAS [40] [C271460]
readCPS o.k.
cafd_0000000f-005_022_007 Fehler:
File for “cafd_0000000f-005_022_007” not found! [C012]
Solution:
Make Sure you have copied the SWE contents from PSDZData/SWE to C:/EsysData/SWE (You should have it in both the locations)
2) Problem:
Open E-Sys and when hit connect get the pop up which has my VIN next to that radio buttion, but nothing shows up in the Target box.
Solution:
More likely that the “dist” folders missing from your installation. The folders should be empty, but they need to be there:
make sure the folder names/directory is correct.
3) Problem:
Ethernet Connection Problems
Solution:
Disconnect and Reconnect
4) Problem:
Read FA failed! Possibly there is no FA stored in the VCM. [C060]
Solution:
There must be some OS or WLAN Adaptor setting that keeps the Wired and WiFi connections isolated or combined that is not set to isolate them.